´ Locking to a color subcarrier is not possible with BBS.
PoE+ (IEEE802.3at standard)
Panning range ±175Á
Quietness NC35 or less
Note *1: It may be necessary to upgrade the version of the controller in order to support the unit. For details on upgrading, visit the support page on the following website. http://pro-av.panasonic.net/
*2: This cannot be configured when the format is 1080/29.97p, 1080/23.98p, 1080/29.97PsF 1080/23.98PsF, 1080/25p, or 1080/25PsF.
*3: To ensure safety, the unit must be secured using the mount bracket supplied.
*4: Use of an STP (shielded twisted pair) cable is recommended.
*5: Depending on the pan or tilt position, the camera may be reflected in the image.
*6: To ensure more safety, AW-HE130W/K can be secured by using the direct ceiling mount bracket (WV-Q105A).
Installation Method Stand-alone (Desktop) or suspended (Hanging)*3
OUTPUT - N/A
INPUT/OUTPUT - N/A
Pan-tilt Head Unit
Camera/pan-tilt head control IP connecting cable
´ When connecting through a PoE+ hub:
LAN cable*4 (category 5e or above, straight cable), max. 100 m (328 ft)
´ When a PoE+ hub is not used:
LAN cable*4 (category 5 or above, crossover cable) max.100 m (328 ft)
RP connecting Cable
LAN cable*4 (category 5 or above, straight cable), max. 1000 m (3280 ft)
RS-422A, AW series protocol
VIDEO OUTPUT HDMI: HDMI connector
´ HDCP is not supported.
´ Viera Link is not supported.
HD/SD-SDI OUT: SMPTE424/SMPTE292/SMPTE259 standards 75 Ω (BNC x 1)
VIDEO OUT: NTSC/PAL 1.0 V [p-p]/75 Ω (BNC x 1)
Input/Output Connector LAN: LAN connector for IP control (RJ‑45), PoE+
RS-422: CONTROL IN RS-422A (RJ‑45)
MIC/LINE input: À3.5 mm stereo mini jack Input impedance: High impedance